LINKS
email me
USED PARTS FOR THE BMW 600s
See photos and comments for condition of parts.  Click on the thumbnail picture below to see a more detailed picture.
Plates 4, 5 and 6 parts - Not all the parts that I have, have been listed.  If you need something that is not listed, please email me and I will respond with an answer shortly.  If I have the part, I will respond with a price and a picture of the actual part.
Plate 4 - Front & Rear Axle
Item         Description
1              Front Right Steering Knuckle
1a            Front Left Steering Knuckle
12, 14, 16, 17  King Pin Set
18 - 21      King Pin Wedge Screw
22             Front Axle
24, 31        Front Axle "O" Ring Set
29             Front Control Arm
38             Front Spring
42             Front Spring housing
47, 48       Front Shock Mounting Bolt
49            Front Wheel Hub
50             Wheel Studs
NA            Lug Nut (For Solid Rims)
54, 55, 56  Front Wheel Hub Spacers
59             Front Brake Plate
65 - 69       Front Brake Cylinder
70              Brake Bleeder Screw
77             Brake Shoe Adjuster
83             Front Brake Shoe
86             Front Brake Spring Set
87             Brake Drum
112            Drive Shaft
117            Rear Axle (available but not pictured)
124            Rear Hub
126            Rear Axle Nut
128            Rear Brake Plate
130 - 134    Rear Brake Cylinder



Front Axle 1                -      $35.00
This axle is in good condition. Some surface rust and wear, but very usable.
Click for larger image
Brake Drum                       $70.00
This has been bead blasted and primed.  It is in good condition.
Click for larger image
Front Hub with Spacer -     $45.00
This hub has been bead blasted and primed.  It comes complete with the bearing spacer.
Front Axle 2                       $40.00
This axle is in good condition. Some surface rust and wear, but very usable.  It has been bead blasted and primed.
Click for larger image
Front Spring Housing       - $40.00
This has been bead blasted and primed.  It is in good condition.
Click for larger image
Front Control Arm 1           $25.00
This control arm has been bead blasted and primed.  It is in very good condition, but come without the rubber bushing.
Click for larger image
Brake Adjuster                 $35.00
This brake adjuster has been cleaned and primed.  It is in very good condition.
Click for larger image
Front Spring -                    $30.00
This is in good used condition.
Click for larger image
Rear Drive Shaft                 $30.00
This rear drive shaft has been cleaned and primed.  It is in good condition.
Click for larger image
Engine Support -               $35.00
This is in good used condition.
Click for larger image
Engine Hanger -               $10.00
This is in good used condition. It come without the rubber insert.
Click here for larger image
Front or Rear Wheel          $40.00
This is in good used condition.
Front Brake Shoe               $55.00
This brake shoe has been bead blasted.  These units have new  linings, ready to install on your car.
Front Left Brake Plate       $60.00
This brake plate has been bead blasted and primed.  The bushing is good and it ready to paint and install.
Front BrkeCyl Exchange    $75.00
This brake cylinder has been bored and lined with a brass sleeve.  Ready to install on your car.  Price requires returned core.
Rear Brk Cyl Exchange     $75.00
This brake cylinder has been bored and lined with a brass sleeve. Ready to install on your car.  Only available as a rebuild of your core.
Lug Nut                                $5.00
This is a lug nut for the solid rim.
Steering Knuckle Rg Side $120.00
This steering knuckle has been cleaned.  The brass inserts are in like new condition.  The needle bearings have been replaced with new bearings.  Oil caps included. Mount to your king-pin and add rubber shock stop.
Steering Knuckle  Lft Side $120.00
This steering knuckle has been cleaned.  The brass inserts are in like new condition.  The needle bearings have been replaced with new bearings.  Oil cap included.   Mount to your king-pin and add rubber shock stop.
Rear Wheel Hub               $70.00
This rear hub has been cleaned and primed.  It is in good condition.
Front Axle 3                       $45.00
This axle is in good condition. Some surface rust and wear, but very usable.  It has been bead blasted and primed.  Includes washer and nut shown.
Front Axle 4                      $45.00
This axle is in good condition. Some surface rust and wear, but very usable.  It has been bead blasted and primed.  Includes washer and nut shown.
Front Control Arm 2           $30.00
This control arm has been bead blasted and primed.  It is in very good condition, but does have some surface rust.  It includes nut and washers as shown.
Front Control Arm 3           $40.00
This control arm has been bead blasted and primed.  It is in very good condition, and includes the rubber bushing.  It includes nut and washers as shown.
Front Hub (plain)              $25.00
This hub has been bead blasted and primed.  It comes without any hardware.
Front Hub with Spacer -    $50.00
This hub has been bead blasted and primed.  It comes complete with all hardware.
Front Hub Spacer Set -      $15.00
Comes with spacer, large flat washer, shim and axle nut.
Lug Stud                             $5.00
This is a lug stud for the wheel hubs.
Left Rear Brake Plate       $60.00
This brake plate has been bead blasted and primed.  It is in excellent condition, ready for paint and installation.
Front Brake Springs      $10.00 ea
This is the springs for either side of the front brake shoes.
Front Shock Lower Bolt       $7.00
This is the bolt to secure the lower end of the front shock to the front axle arm.
Rear Axle Nut                     $5.00
This is the castle nut for the rear axle.
Steering Pin Kit                $25.00
This steering pin set includes a good pin, upper fiber washer, lower steel washer and two new rubber "O" rings.
Metric "O" Ring for Axles   $3.00
This "O" ring set includes (3) "O" rings as listed in the parts book - items 31 and 24.  These are new "O" rings for the front axle and control arm.
Gear Shifter Box                $50.00
This shifter box is in excellent confition.  It has been bead blasted and clear coated.
Gear Shifter Box Plate      $10.00
This shifter box plate is in excellent confition.  It has been bead blasted, primed and painted..
Gear Shifter Box Plate      $10.00
This is the shifter box lower cover plate - item 3 in the parts book.  It has been bead blasted, primed and painted..
Shifter Box  Reverse Plate $5.00
This plate is to prevent the shifter from being placed into reverse by mistake.  It is item 74 on the parts list.  It has been bead blasted, primed and painted.
Steering Pin Wedge Screw $6.00
This is a good used wedge screw for the king pin.
Plate 5 - Steering / Gear Shifter
Item        Description
13            Master Brake Cylinder
70            Shifter box
92            Shifter Box Upper Plate
93            Shifter Box Lower Cover Plate
74            Shifter Box Reverse Plate


Plate 6 - Chassis
Item        Description
159, 161          Engine Hanger
165                 Engine Support
N/A                    Wheel

Master Brk Cyl  Rebuilt     $125.00 Exchange only
This brake cylinder has been bored and lined with a brass sleeve.  All new internals.  Ready to install on your car.
Bleeder Screw              $6.00 ea
or get set of 4 for              $20.00
These are the very hard to find 38 mm long bleeder screw for the brake cylinders.  These are new!
If you don't see what you need email me - I do have other parts not listed - or check the Link to other sites for parts suppliers.


SOLD OUT
SOLD OUT
SOLD OUT
Rear Brake Springs      $10.00 ea
These are the springs for the top or bottom of the rear brake shoes.  Let me know if you want top or bottom.
SOLD OUT