LINKS
email me
USED PARTS FOR THE BMW 600s 
See photos and comments for condition of parts.      Please wait... Many photos to load
600 Engine Parts - All parts are used and have been cleaned and inspected.  Condition is noted under each piece with price.  These are extra parts I have obtained during my restoration project that I do not need.  Items pictured are not necessarily the items for sale - I will provide actual picture of item upon request.
Plate - 00Engine
Item    Description
1         Case
12       Front Bearing Support
16       Oil Pan Screen
22       Timing Chain Cover (complete)
25       Oil Filler Cap
36       Rear Bearing Support (exchange)
41       Timing Gear Oiler
44       Oil Pan
45       Oil Dipstick
53       Crankshaft Assembly
55       Front Oil Slinger
56       Rear Oil Slinger
63       Rear Oil Slinger Spacer
69       Front Oil Slinger Spacer
72       Piston - Standard Size with Rings
72        Piston - without pin
77       Cylinder
80       Cylinder Head Right
80       Cylinder Head Left
91       Valve Cover 
93       Valve Cover Clamp
96       Valve Lifter
97       Push Rod
99       Rocker Arm (Complete)
Oil Pump Drive Gear               $40.00
This gear is in like new conditon.  
Oil Pickup & Screen                $20.00
This piece is in good condition.  
Crankshaft Bearing Support $35.00
This support is in very good condition.
Valve Covers                    $15.00 ea.
These covers are in like new conditon.
Push Rods                         $40.00 ea
These rods are in very good condition.
Cam Gear Oiler                $15.00 ea
Oiler is in good conditon, some surface rust.
Plate - 00          Engine
Item     Description
106        Head Bolt
113        Cam Shaft
115        Rear Cam Bearing Support
117        Lock Ring For Cam Bearing Support
119        Cam Gear
122        Oil Pump Shaft & Gear
123        Oil Pump Driven Gear
124        Oil Pump Gear
128        Oil Pump Cover
135        Oil Filter Cover
138        Oil Filter "O" Ring
139        Oil Intake Tube and Screen
144        Pressure Plate
145        Flywheel
153        Cooling Fan Cover
              Cooling Fan
Head Bolt                           $8.00 ea
Bolts are clean in excellent condition.
Oil Pan                        $40.00 ea
This oil pan is has been bead blasted and painted.  It has some small scratches in the metal, but is in very good conditon.
Left Head                              $250.00
This head has been disassembled, cleaned and inspected.  The valve guides are in good condition.  The valves were lapped in and seated.
Right Head                   $250.00
This head has been disassembled, cleaned and inspected.  The valve guides are in good condition.  The valves were lapped in and seated.
Valve Cover Clamps          $15.00 ea
These clamps have been bead-blasted and primed with automotive primer.
Cam Gear Cover -             $50.00
This piece is in good condition.  It has been cleaned and steel parts painted.  
Cam Shaft  Bearing holders     $20.00
This holder is in like new condition.
Cam Shaft                     $125.00
This shaft is in very good used condition, ready to install in your engine.

Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Click for larger image
Oil Filter "O" Rings               $1.50 set
These are new metric "O" rings for the oil filters.  Two are required for an oil change - they are sold in sets of two..
Click for larger image
Oil Filler Cap                    $30.00 ea
This cap has been bead blasted and the center cap repainted red.
Click for larger image
Oil Pan Screen                     $15.00
This screen is clean and in like new condition
Click for larger image
Crankshaft Bearing Support  $120.00 Exchange
This is a service to repair these bearing supports.  I do have several that I will sell (repaired units) at $145.00 each without exchange.  Email me for details
Click for larger image
Dipstick                             $35.00 ea
This dipstick has been cleaned and the top loop repainted red.
Click for larger image
Crankshaft (used)                  $400.00
This is a good used crankshaft.  It has been checked for trueness and the rod bearings are all in good condition.  The rods have been flushed with solvent and then with fresh oil.
Click for larger image
Crankshaft (core)                  $140.00
This crankshaft is a used shaft with a bad front (flywheel side) rod bearing.  It is good to return for a core so you can obtain a spare crankshaft.
Click for larger image
Oil Slinger Spacer (rear)        $15.00 
This s the spacer between the oil slinger ring and the rear crankshaft support bearing (armature side).
Click for larger image
Oil Slinger Spacer (front)        $15.00 
This s the spacer between the oil slinger ring and the front crankshaft support bearing (flywheel side).
Click for larger image
Piston Standard Size     $150.00 
This piston is standard size and come with pin and pin keepers.  This is a used piston. Rings not included.
Click for larger image
Cylinder - Stand. Bore           $200.00 
This cylinder is standard bore and within specifications.  It has been honed and ready to install.
Click for larger image
Cylinder - Stand. Bore           $100.00 
This cylinder is standard bore but has some rust marks in the cylinder walls.  It would be good for boring oversize or having it lined.  Contact me for companies who will bore these cylinders.
Click for larger image
Valve Lifter                $65.00 ea
This lifter is in good condition ready for use.
Click for larger image
Click for larger image
Lock Ring for Cam Bearing       $2.00
This lock ring is in like new condition
Click for larger image
Cam Shaft Gear             $125.00
Gears are in fair condition - email me for availability and "marked" number.
Click for larger image
Oil Pump Shaft                       $65.00
This shaft is in very good used condition, ready to install in your engine.  
Click for larger image
Oil Pump Driven Gear             $20.00
This is the driven gear in the oil pump.  It is in very good condtion.
Click for larger image
Oil Pump Cover Plate    $10.00
This gear is in good used conditon.  
Click for larger image
Oil Filter Cover                         $20.00
This is the cover for the oil filter.  It has been bead blasted, primed and painted gloss black.
Click for larger image
Clutch Pressure Plate    $100.00
This piece is in good condition.  
Click for larger image
Flywheel                                $75.00
This flywheel has been blead blased and primed (tape is covering friction surface to prevent rust while in storage).  Please specify size of center hole - I have both sizes available.
Click for larger image
Cooling Fan Cover                   $70.00
This cover has been bead blased and clear coated for lasting luster.
Click for larger image
Cooling Fan                            $150.00
This fan has been bead blased and clear coated for lasting luster.  The TDC blade was repainted red.
Front Oil Slinger               $55.00
This is the oil slinger closest to the flywheel.  It has been cleaned and is ready to install.
Picture to come
Picture to come
Rear Oil Slinger                    $35.00
This is the oil slinger closest to the dynastart.  It has been cleaned and is ready to install.
Picture to come
Rocker Arm                            $40.00
This is a complete rocker arm, please specify intake or exhaust.
Picture to come
Engine Case                          $125.00
This case is in excellent condition.  It has been cleaned and is ready to use.
If you don't see what you need email me - I do have other parts not listed - or check the Link to other sites for parts suppliers.

SOLD OUT
SOLD OUT
SOLD OUT
SOLD OUT